Features and Benefits

  • Sunlight Readable
  • Anti-Reflective Glass
  • 10 Soft Keys
  • 5 Pre-Defined Hard Keys
  • Video Input
  • Cabin Or Panel Mount
MMX LCD7 Display unit is cost-efficient, rugged operator control panel for use on heavy-duty vehicles and work machines that must operate outdoor in harsh conditions. It is fully equipped with five hard and ten soft-function keys, integrated buzzer, CAN bus and video inputs.
The display can be installed in-dash or out-dash with its specific articulated support.

Supply Voltage8-32 V DC
Current1.2 A maximum
Electrical Protectionovervoltage, transients, reverse polarity, load dump
CAN2x CAN BUS ISO 11898, 2.0B high speed
Video2x PAL/NTSC
USB1x USB 2.0, for firmware update
Display typeActive matrix colour TFT LCD 7 inch, 16.2M colours, sunlight-readable, anti-reflective glass
Resolution800 x 480 pixels, dot pitch 0.1905 mm, 16:9
Viewing angleHorizontal 130°, Vertical 110°
Luminance500 cdm
Contrast ratioJanuary 24, 1900
Keys 10 soft keys and 5 hard keys, backlit
Touchresistive - optional
Acoustic signal outputintegrated buzzer max 85 dB
Digital OutputLow side, 0.7 A max, optional
Operating systemLinux embedded
KernelARM 32-bit uP, 256 MB Flash memory
IP Class (IEC529)IP65
EMC ConformityEN61000-6-2 noise immunity
EN61000-6·4 radiation of interference
Temperature Rangestorage -40° to +85°C
operating -40° to +85°C
Housing Materialgrey rubber housing
Mountingin-dash with 4 screws M3 or 2.9 mm tapping screws or out-dash with articulated support
Matting ConnectorTyco-AMP Ampseal 1437288-6, 26 way
W x H X D [mm]221 x 149 x 32, without matting connector
Weight650 g

MMXLCD77” TFT LCD Control panel, antifog, no touch
For more options please contact the supplier.

Product flyer

Product flyer with datasheet