Features and Benefits
-
2 Channels
-
High Current Low Side Mosfet Outputs
-
Powered by either 12 or 24V
-
Factory Programmable
-
Ready for Immediate Operation
Flashers
Flasher is an electronic device with two independent low side output signals which can control for e.g flash lamps mounted on the front, rear or on the vehicle sides, warning for open steps etc.
The flasher can be programmed to different flashing user patterns.
| POWER | |
| SUPPLY VOLTAGE | 8-30 V DC |
| CURRENT | 0.1 A maximum, no outputs active |
| ELECTRICAL PROTECTION | reverse polarity |
| ENVIRONMENT | |
| IP CLASS (IEC529) | IP20 |
| TEMPERATURE RANGE | storage from -40° to +85°C operating from -40° to +85°C |
| I/O | |
| Digital Output | |
| OUT1 | negative switching (low-side), max. 2 A |
| OUT2 | negative switching (low-side), max. 2 A |
| Loads | inductive, resistive |
| ENCLOSURE | |
| HOUSING MATERIAL | ABS |
| MOUNTING | with 1 screw |
| CONNECTOR | faston 2.8 x 0.8 |
| SIZE AND WEIGHT | |
| W x H x D | 45 x45 x 18 mm without connector |
| WEIGHT | 0.1 kg |
| Product Code: | |
| FLASHER 2N | Flasher 2x Output GND, 1A, 10-30V DC, fact. programmable |
Product flyer
Product flyer with datasheet